Innovation in Air Distribution

Filtration

Fire/RescueVentilationPortable LightingCustom ProductsVentilation

Innovation in Air Distribution

Setting the Industry Standard in

Safety Products for over 25 Years

 

 

 View Catalog Page

View Ordering Info

 

A remote air manifold is often called a Point-of-Attachment (POA). All of our remote air manifolds meet NIOSH requirements of the 87-116 (1989) document for point-of-attachment.  The Point-of-Attachment (POA) series provides remote manifold capability for respirator users, while complying with NIOSH  regulations. The POA series consists of a regulator, pressure gauge, safety relief valve, and fitting congruency necessary for proper respirator operation. The POA box can be located any distance from the Grade-D filtration Breather Box® or filtration panel. The remote air manifold (POA) assembly becomes the NIOSH attachment point for the respirators and is now limited to a maximum of 300 feet of breathing air hose at the air outlet fitting on the remote POA box.
Remote Air Manifolds
Point of Attachments (POA)

POA-4

Specifications:

  • Adjustable regulator
  • 1/2" Industrial Interchange male inlet plug
  • Pressure gauge (0-160psi)
  • Safety relief valve - set at 125psi
  • 1/4" respirator couplings supplied with safety locks
  • Aluminum block manifold
  • Water resistant polycarbonate case
  • Rubber gasketed lid helps to prevent internal contamination
  • Unit can be taken into wet or hazardous locations

Did You Know

Using POA units, you can move the NIOSH point-of-attachment for airline respirators closer to the worker.

 POA Series

POA-XWM

POA-2WM

Wall Mounted POA Manifold

POA-4R

POA-4R

Independent Regulator POA Manifold

POA-5RF

POA-5RF

Independent Regulator POA Manifold
with Filtration
  • Available from 1-8 outlets
  • Adjustable regulator
  • Pressure gauge (0-160psi)
  • safety relief valve - set at 125psi
  • Aluminum block manifold
  • Use with plant compressor systems
 Four independent regulators allow each worker to adjust their desired pressure depending on the style or respirator and length of hose. Final filtration is added to remove water and particulates in plant air piping systems.

Custom Designed POA Options

  • Clear view windows
  • Multiple filters and regulators
  • Stainless steel or aluminum cases
  • Low Pressure warning alarms
  • Models available for 1 - 8 workers
  • CONTACT CUSTOMER SERVICE FOR DETAILS 

Portable CO Monitoring
Intermittent or Continuous Sampling

View Catalog Page and Ordering Info

View/Download the User Manual
This portable airline monitor connects easily to a breathing air filtration source or ambient air pumps and monitors the air for CO content.  The audible alarm (90dbA) and light will activate when the CO level exceeds 10ppm (5ppm Canadian).  External alarm and lights allow for the unit to be used in the closed position and eliminates damage and contamination of the internal components.

CO-14LAC

CO91-14LAC
Portable Co Monitor

Specifications:

  • Operates on 9-volt batteries, 8-16 VDC, and/or 115 VAC
  • Connector kit includes 1/4" Industrial Interchange coupling supplied on 5ft. hose
  • Standard alarm jack allows for connection to remote alarm devices
  • Standard version allows air pressures up to 150psi
  • Available in high pressure version up to 6000psi for fill compressors
  • Optional high intensity alarm
  • Available in CSA approved Intrinsically safe version, 9 VDC only

 
CO91-14LAC     Applications
  • Portable filter pots
  • Filter systems
  • Ambient air pumps
  • Equipment Rentals
  • Retro-fit old style compressors and filtration systems
Monitor in use

Alarm set point is set at 10ppm in compliance with U.S. and International standards. Specify 5ppm for Canadian operation.

View Catalog Page and Ordering Info

CO-91PM

CO-91PM
 
Panel Mounted CO Monitor
for Fixed Systems
Continuous Sampling of CO and O2 levels

This durable carbon monoxide airline monitor panel can be ordered to retrofit any existing Grade-D breathing air system.  It can be ordered with dual monitoring for CO and Oxygen (O2) content.  Units supplied with high intensity audible alarm and 115 VAC power cord.  All units are powder coated steel and are ready for wall mounting. Available in CSA approved Intrinsically safe version, 9 VDC only.

CO2-91

CO/O2 Monitor
CO2-91
 

CO-91IS

CSA Approved Intrinsically Safe Monitor
CO-91IS

 

View Catalog Page

Custom Designed Filtration Systems

Air Systems' engineering and design team will manufacture a custom Grade-D breathing air system to meet your most stringent needs.

BB650-COPM

BB650-COPM 650cfm Grade-D Filtration
Plant Filtration Systems are Available up to 3000cfm

Custom Plant Breathing Air

Custom Plant Breathing Air

Grade-D Filtration for Clean Room ApplicationsGrade-D Filtration for Clean Room Applications

Explosion-Proof Grade-D System

Model B50-COPMEX, 50cfm, explosion-proof Grade-D Filtration supplied with NEMA 7 enclosure for CO monitor and electronics with viewing window mounted on a steel panel. The 50-EXALPST, explosion-proof visual alarm and strobe, is designed for use with the explosion-proof panel and has a high intensity pneumatic audible alarm with adjustable volume.  Consult factory for additional details.

B50-COMPEXExplosion-Proof Grade-D
Filtration Panel
B50-COMPEX50-EXALPST 

 

 

 

Explosion-Proof
Remote Alarm
50-EXALPST

Custom Filtration

Portable Plant Filtration Cart with Auto-Air™ Feature

BB150-CO

150cfm Portable Grade-D Filtration