Innovation in Air Distribution

View the Catalog Page and ordering Info

View/Download the User Manual

Hazardous material vacuums are equipped with a HEPA filter system consisting of a certified absolute HEPA filter, a double layer intermediate micro filter, and a totally enclosed 2-ply disposable paper filter bag. The HEPA filter has a steel outer casing and micro-fibered glass paper filter media separated by corrugated aluminum sheeting that is encased in a protective steel screen. All HEPA filters are rated with a minimum efficiency of 99.97% at 0.3 microns. They are tested using the HOT DOP method @ 100cfm, UL 586 certified, maximum 1" resistance. Models AV-2 and AV-15 motor heads are provided with a remote exhaust port for 1.5" or 2.0" hose. 

Models AV-2, AV-5, and AV-15 are shipped with a HEPA filter, an intermediate pre-filter, a 2-ply disposable paper filter bag and tool kit. The tool kit includes, 5 ft. curved steel wand, 10 ft. vacuum hose with end cuffs, crevice tool, inlet swivel connector and hard floor brush. An optional wet conversion kit converts the dry vacuum for liquid pick up (not available on Model AV-4POLY).

Specifications

Model AV-4POLY: 120 VAC, 60Hz, 1.3HP, by-pass 7.5 amps, 900 watts, 94cfm, 84" water lift, 4 gallon recovery, 6 gallon polyethylene tank, 30ft/18-3 power cord with plug, 78dbA, 10 ft. hose (1 1/4") supplied. Motor head has a 2 year warranty. Includes all filters and tool kit. (Uses electric or pneumatic beater bar)

MODEL AV-2: 120 VAC, 60 Hz, 1.3 HP, 2 stage by-pass, 7.5 amps, 900 watts, 94 cfm, 84" water lift, 2 gallon recovery, 3 gallon stainless steel tank, 30'/ 18-3 line cord with plug, 78dbA, 5ft. hose supplied, Poly motor head enclosure with 2 year warranty. Includes all filters and tool kit.

NOTE: Electric motors are UL, CUL and CSA listed. Optional voltage and Hertz available. Consult Customer Service for details.