Industrial Saddle Vent®
 CONFINED SPACE VENTILATION - "DO IT RIGHT THE FIRST TIME"
The Saddle Vent® was invented by a professional tank cleaner to make it easy for his workers to enter and exit a confined space. The Saddle Vent® takes up only 3 inches in a manhole and functions as an air conduit. Eight inch air hose is attached to both ends of The Saddle Vent® and placed in the entry access hole, thus eliminating the need to remove the hose each time entry or egress is required. The Saddle Vent® revolutionizes confined space operations by offering a level of safety and productivity that has never been available. One model is available for industrial manhole work, and a specific model is designed for doing tank entry work.
The Saddle Vent's® unique air flow design does not reduce air flow to the worker.

 THE SADDLE VENT WHEN SET IN PLACE, ALLOWS UNRESTRICTED ENTRY AND EGRESS AND ALLOWS FOR MORE RAPID CONFINED SPACE EMERGENCY RESCUE

The Saddle Vent® ventilator provides continuous access to the manhole for either entry or egress. Traveling in and out of the confined space can now be done quickly and safely. The Saddle Vent® increases worker productivity as well as the ability to perform confined entry rescue. The entire Saddle Vent® system can be completely set up in less than five minutes. Eight inch air duct is installed on the bottom of The Saddle Vent® and run to the bottom of the manhole. This allows fresh air to be supplied to the workers and displace any harmful gases that may be deadly for the occupants. The use of the 90 degree elbow removes the severe kink in the air duct and allows for rotation of the intake duct to any desired position at the street level.

INDUSTRIAL MODEL
SV-189
Saddle Vent® is the Registered Trademark of Air Systems International
 

 ·Length:  43.5"
 ·Width: 14.5"
 ·Top Opening: 8"O.D.
 ·Bottom Opening: 8"O.D.
 ·Construction: .25" Polyethylene
 ·Temperature Rating:  +250 degrees F Melt Temp
-158 degrees Brittleness Temperature
 ·Color:  Safety Orange

 ·U.S. PATENTS #4794,956   #4,982,653
 ·CANADIAN PATENT
#1,286,999
 ·EUROPEAN PATENT
#0376425
 ·AUSTRALIAN PATENT # 120711





 		Click to Printprint page

Set-up Procedure

Confined Space Ventilation Kits

Conductive Saddle Vent for Hazardous Locations

Ventilation Blowers

Axial Fans

Ventilation Accessories

E-mail this Page

Confined Space Ventilation On-line Training

 

 

 


Standard Setup Procedure

       
Back to top ▲