Drag-Bag™
RESCUE SYSTEM
DESIGNED FOR RAPID INTERVENTION AND USAR TEAMS
 |
Rescue professionals helped
design the DRAG-BAG™
system. It is designed to be carried or dragged into the toughest rescue
scenarios carrying the air, rope, hose and tools a rescuer would need during
rapid intervention and rescue.
EXTERNAL SPECIFICATIONS:
The DRAG-BAG™
is constructed externally of 18oz PVC
material reinforced with 1000 denier scrim material. The fabric
is flame retardant and permanently treated to meet NFPA-701 and California
Codes.
Size: 33"L x 11"H x 10"W
Weight: 5.0lbs/12.3kg
 |
Download User Manual
Click to Print
Ordering
Information
|
|
Two external
zippered pouches: One side pouch for holding up to 300 ft. of
Kevlar rope. This pouch has steel grommet outlets, front and rear,
to allow rope to pan out without removing it from the bag. The
other side pouch is designed to hold up to 25 feet of 3/8" breathing air
hose. A reinforced "pass through" hole is provided to connect
directly with the air regulator assembly inside the bag.
Reflective striping on both sides of bag. |
DRAG-BAG™
Model DBRS-1QF w/ Quick Fill Hose Model QFH-5
 |
 |
INTERIOR SPECIFICATIONS:
Black reinforced PVC material. Water and mildew resistant with
1/2" dense foam padding on top provides the strength and shock
resistance for the most hazardous rescues.
Three internal pouches are provided to fit different types of
equipment. One large 6"H x 17"L pouch is designed for Motorola
radios with an extended battery pack. Two 4"H x 7"L pouches are provided
for small equipment like a man down alarm or First-Aid supplies |
The special nylon cylinder/regulator
frame assembly (DRAG-REG) has been designed specifically for use in the
DRAG-BAG™
. Install a 30 or 60 min. 4500psi cylinder on the frame and secure
firmly with an adjustable cylinder strap. A pressure gauge, safety
relief valve, CGA-347 hand tight nut, an adjustable air pressure
regulator preset at 100psi are provide as standard. A 1/4"
industrial interchange coupling is supplied on the frame for air hose
attachment. DRAG-REG
Frame Size: 27"L x 9"W
Weight w/o cylinder: 6.4lbs
|
| . |
ORDERING INFORMATION
DBRS-1
DRAG-BAG™
Rescue System complete with DRAG-BAG™ and DRAG-REG
(regulator/cylinder frame assembly)
DBRS-1QF Rescue System complete
with DRAG-BAG™, DRAG-REG,
and QFH-5 Quick Fill Hose
ACCESSORIES
DRAG-BAG
Bag assembly, no accessories or regulator/cylinder frame included
DRAG-REG
Regulator/cylinder frame assembly - holds one 30 or 60 min 4500psi
cylinder (optional),
preset adjustable regulator, hand tight wheel, nylon removable frame, 125psi
relief valve, 1/4"
male thread and low pressure alarm whistle 5000psi rated
H-15DB 15 ft. of 3/8" breathing air hose with "Y" fitting, no couplings
H-25DB 25 ft. of 3/8- breathing air hose with "Y" fitting, no couplings
QFH-5 Quick fill hose,
5 feet, female FD-17 coupler with 1/4" male thread, for NFPA 1981
regulation
Back to top
▲
