Remote Air Manifolds
POINT OF ATTACHMENT SERIES
Model POA-4 - Open Position
· Meets
NIOSH requirements for
point-of
attachment
· Adjustable regulator
· 1/2" male Hansen plug inlet
· Pressure gauge(0-160psi)
· Safety relief valve - set at 125psi
· 4 outlet respirator manifold
· Aluminum block manifold
POA MANIFOLD WITH 4 INDEPENDENT
REGULATORS
Model POA-4R
Four independent regulators
allow each worker to adjust their desired pressure depending on the brand
(style) of respirator and length of hose. |
The Point-of-Attachment (POA) series provides remote manifold
capability for respirator users, while complying with
NIOSH (The
National Institute for Occupational Safety and Health) regulations. The POA
series consists of a regulator, pressure gauge, safety relief valve, and fitting
congruency necessary for proper respirator operation. The POA box can be set any
distance from the Grade-D filtration Breather Box or
filtration panel. This POA assembly, where the respirator attaches, is now
limited to a maximum of 300 feet of breathing air hose.
Custom designs are available
for 1 - 8 workers. Contact our Customer Service Department for
details.
WALL MOUNTED POA MANIFOLD
Model POA-XWM
 Designed for wall
mounting with the included bracket. Available with 1 to 8 outlets. Adjustable regulator, pressure gauge, safety relief valve, 4 outlet
respirator
manifold. Replace 'x' in the part number for the required
number of fittings.
Back to top
▲ |
Download User Manual
Model POA-4
Click to Print
Portable
Pre-Filter
Portable Cooling
Air Manifold (POA)
Ordering
Information
E-mail this Page
|
Portable Pre-Filter
Model PF-240
 |
Designed for use with compressors that discharge a large volume of oil and
water. Use after compressor and before the Grade-D filtration unit.
High capacity 240 cfm filtration - 200 psi rated with metal bowl.
Automatic drain assembly.
Galvanized steel frame with carry handle.
Supplied with 1/2" Chicago
fitting on inlet, 1/2" Hansen 5000 socket on discharge.
Back to top
▲
|
Cool-BoxTM
Portable Cooling Air Distribution Manifold
Provides NIOSH Point-of-Attachment
components and cooling in one package!
Just add ice for immediate respirator cooling!
Download User Manual
Back to top
▲ |
Provides low cost cool air
anywhere. Operates with any constant flow airline Type-C mask or hood
style respirator. Ideal for cooling Level "A" chemical suits and air
supplied hoods. Provides cool air for up to four workers, eliminates the
need and expense of noisy vortex cooling tubes. Designed and engineered
for less than 2psi pressure drop in the system with flow capacities to 70
cfm, . Provides approximately 50 degree F output air temperature with input
temperatures up to 180 degree F and 75 cfm flow capacity. Requires only ice for
operation which provides 4 to 8 hours of operation. Manual condensate
drain installed inside, gauge, and safety relief valve installed in the
system with a final filter. Entire unit is packaged in a rugged Igloo
roller cooler with a fold down pull handle, Ambient air pump conversion
kit (Part #: BACB-196K) provides 5 ft. of hose and fittings required to
convert any low pressure air pump for use with the COOL-BOXTM. |
|
ORDERING INFORMATION
Please specify Hansen Or Schrader fittings when ordering. Other
fittings available for an additional charge. |
|
POint-of-attachment series |
POA-4
Four worker Point-of-Attachment box
POA-4R
Four worker Point-of-Attachment box with independent regulators
POA-4F Four worker Point-of-Attachment
with final filter
POA-4RF Four worker Point-of-Attachment box with independent
regulators and final filter
BBM-4LF "NRC" Point-of-Attachment box with
independent regulators, final filter, and low
pressure alarm
POA-"X"WM Wall mounted Point-of-Attachment
manifold, replace "X" in part number for the required number of fittings
BACB-196 Cool-BoxTM
complete with 1/ 4" fittings - rated to 150psi inlet pressure
BACB-196LP Cool-BoxTM
designed specifically
FOR USE WITH AMBIENT AIR COMPRESSORS ONLY
BACB-196K Conversion kit for any ambient air pump to operate
the COOL-BOXTM.
Back to top
▲
