Air Quality Testing

Air Systems breathing air quality test kits are designed to test the air produced by compressors (Model LP-A4) and compressed air in cylinders (Model HP-A4 and HP-A445).  These tests are accomplished through the use of low cost detector tubes that provide a "go/no go" test of the air quality.  If a high reading is found, this signals the user that they have a potentially unacceptable quality of breathing air.  If this occurs, a laboratory analysis of the air components must be made to determine the exact readings of the air quality and take corrective action. For precise laboratory analysis, click here. Low Pressure Air Quality Test Module Model LP-A4 Plugs directly into outlet fitting on All Breather Box and Panel models.

Complete Test Kit Model LP/HP-A4K High Pressure Cylinder Air Test Module Models HP-A445 and HP-A4 Back to top ▲

Download User Manual Click to Print Ordering Information Laboratory Air Testing Service Cylinder Air Testing E-mail this Page

Electronic CO/O2 Cylinder Air Test Meter
TEST AIR QUALITY PRIOR TO USE
The Model AQT-02 Air Quality Test Meter has been developed out of a need to test rented cylinder blended air quality before putting them to use.  Obtain an immediate and accurate oxygen reading for both high pressure cylinder air and low pressure plant air lines.  The tester can be ordered with an additional sensor to read carbon monoxide simultaneously with oxygen, Model AQT-C002. The tester requires two 9-volt DC batteries for operation and is supplied with 5 feet of hose.   For cylinder air testing, order the optional high pressure adapter, AQT-347LP.

Model AQT-COO2

Model AQT-COO2 DESIGNED FOR LOW PRESSURE AIR TESTING The Air Quality Test Meter is supplied with low pressure air hose and a male 1/4" Hansen 3000 series plug for direct attachment to any low pressure (under 120psi) Grade-D air source.

Model AQT-347LP HIGH PRESSURE AIR CYLINDER ADAPTER When testing bottled air cylinders, the AQT-347LP adapter must be ordered.  It reduces cylinder pressures up to 5000psi down to 100psi.  The AQT's sample hose can then be plugged directly into the air cylinder adapter.

Ordering Information

Download User Manual

Back to top ▲

 

Laboratory Air Testing Service
Fast *Easy* Accurate
AIR SAMPLING KITS AVAILABLE FOR RENTAL OR PURCHASE

Certified laboratory air testing is now available for high pressure bottled air or low pressure compressor air requirements. Take your own samples in 10 minutes and send out for precise laboratory results. A 2LA accredited lab will test to any recognized standards, e.g., CGA, NFPA, or Federal MIL Specs. Results can be obtained in less than 3 days; same day service is available for an additional charge.

Model ACK-97 & AQT-1LS

Ordering Information

Back to top ▲

Back to top ▲