Fixed Breathing Air Panels
GRADE-D FILTRATION FOR PERMANENT MOUNTING APPLICATIONS

These fixed Grade-D filtration systems are designed to provide breathing air for a specific number of workers.  The system filters inlet air to provide respirator users with Grade-D quality air.  The first stage element filters bulk water and particulate, the second stage coalescing filter removes atomized oils and ultra-fine particulate, and the third stage removes organic vapors and odors.  Filter change indicators are standard on all three filtration stages.  Filtration efficiency is 99.99% @ .01 microns.  A built-in carbon monoxide monitor operates on 9-volt DC and/or 115 VAC for continuous detection.  A high intensity audible alarm and light signals the workers of high CO content in their breathing air.  A 115 VAC electrical conduit box is provided as standard.
All portable and fixed breathing air filtration systems meet or exceed U.S. and Canadian breathing air standards.
Federal OSHA 29 CFR 1910.134
"Compressor Operations for Breathing Air"
Army Corps of Engineers EM385-1-1,
paragraph 07b-11-4,
"Compressed Breathing Air"

SINGLE USER GRADE-D FILTRATION PANEL

Model BB15-COPM

SPECIFICATIONS
 ·Ideal for single user breathing air stations
 ·Small and compact, ready for wall mounting
 ·115 VAC and/or 9-volt DC operation for CO monitor 
(supplied with power cord)
 ·Indicator lights and standard audible alarm
(90 dbA) mounted on CO monitor
  ·Flow rate 17 cfm
 ·Auto drains in 1st and 2nd stage filters
(no filter change indicators)
 ·Dimensions:  15 W x 15H

CUSTOM PANEL SIZES ARE AVAILABLE UP TO 3000CFM CAPACITY!!
1200cfm Custom Breathing Air Panel
Model BB50-COPM


Model BB30-COPM

SPECIFICATIONS
  ·Standard panel mounted versions supply 30, 50, 75, 100, and 150 cfm,
at 125 psi outlet pressure
  ·Grade-D air is monitored for carbon monoxide (CO) and an optional version for simultaneous monitoring of CO and Oxygen (O2) is available
  ·High intensity audible alarm (123dbA) is standard. Warning lights are supplied on all panels for airline monitoring
  ·Monitor operates on 115 VAC or 8-16 VDC, conduit box supplied for 115 VAC and remote alarm connection
  ·Optional Intrinsically Safe Model, 9-volt DC
 ·Supplied with inlet coupling or NPT for permanent installations
 ·Automatic drains supplied as standard in stage 1 and 2 filters
 ·Filter change indicators on all filters
 ·Panel Dimensions:  23W x 22 H  for all standard models

ALL PORTABLE AND FIXED BREATHING AIR FILTRATION SYSTEMS MEET OR EXCEED OSHA 1910.134 AND CANADIAN Z180.1 BREATHING AIR STANDARDS

 Download User Manual

Click to Printprint page

Explosion-Proof Filtration System

Auto-Air Feature

E-mail this Page

Ordering Information

Calibrating the CO Monitor

Breathing Air Quality Position Statement

Grade-D Filtration Training Movie

 

 

 

 
 
 

Explosion-Proof Filtration System
Explosion-proof NEMA 7 enclosure for CO monitor and electronics. Viewing window for CO monitor. External test buttons. Steel mounted Grade-D filtration with capacities from 50 to 3000cfm. Custom options available.  Consult our full service engineering department for more details.


                    MODEL B50-COPMEX

High intensity pneumatic audible alarm with adjustable volume, explosion-proof visual strobe, metal strobe guard mounted on a steel panel frame assembly

  

Back to top ▲

 

 

 

BREATHING AIR QUALITY POSITION STATEMENT
The responsibility for the quality of breathing air rests with the user. Compliance with federal, state, or local regulations is the responsibility of the user, and this recommendation does not supersede any existing rules, regulations, or laws which may apply. Breathing air filtration products meet or exceed CGA Grade-D specifications for air quality as adopted by Federal OSHA. Compressor air quality standards meet or exceed OSHA 1910.134 requirements. When the components are used in accordance with the manufacturer's instructions and recommendations, the "system" meets or exceeds federal regulations presently in force. It is incumbent upon the user to comply with any changes in the regulations or law which may occur in future situations.
The air supply compressor should be located in a safe, clean ambient air environment. This "safe" location should be tested periodically using proper instruments to ensure clean ambient air quality on a consistent basis. Total system Grade-D air quality should be tested at initial start up. If the compressor is moved, retesting air quality is recommended. Should the location or environment significantly change, the air quality should be retested. The compressor filters and oil level should be checked daily and changed when contaminated or when the maximum number of "run" hours is achieved.
This series of air filtration units should be used according to the manufacturer's recommendations. The standard filtration package is not explosion-proof and should be located in a non-explosive environment. (An intrinsically safe model is available).  The carbon monoxide monitor should be calibrated monthly or if the accuracy of the monitor is in question. System air quality should be tested for, but not limited to, the following Grade-D air components:

CO - Carbon Monoxide
O2 - Oxygen
CO2 - Carbon Dioxide
H2O - Water (Moisture Content)
Hydrocarbons (Oil Mist)
Total Particulates

The maximum allowable level of these air quality components varies depending on
Grade-D or E requirements.
Our Breathing Air compressors and filtration systems meet all of the following federal
specifications when used and serviced in accordance with our instructions:

Federal OSHA 29 CFR 1910.134
"Compressor Operations for Breathing Air"

Army Corps of Engineers EM385-1-1,
paragraph 07b-11-4,
"Compressed Breathing Air"
Back to top ▲

 

ORDERING INFORMATION
 Please specify Hansen Or Schrader fittings when ordering. Other fittings available
for an additional charge.
 

***DON'T FORGET TO ORDER YOUR CO MONITOR CALIBRATION KIT***

Standard PANEL Models
MODEL DESCRIPTION
BB15-COPM Standard Grade-D breathing air panel with CO monitor - 15 cfm with 1 respirator coupling
BB30-COPM Standard Grade-D breathing air panel with CO monitor - 30 cfm with 2 respirator couplings
BB50-COPM Standard Grade-D breathing air panel with CO monitor - 50 cfm with 4 respirator couplings
BB75-COPM Standard Grade-D breathing air panel with CO monitor - 75 cfm with 6 respirator couplings or NPT outlet
BB100-COPM Standard Grade-D breathing air panel with CO monitor - 100 cfm with 4 respirator couplings or NPT outlet
BB150-COPM Standard Grade-D breathing air panel with CO monitor - 150 cfm with NPT outlet
BB250-COPM Standard Grade-D breathing air panel with CO monitor - 250 cfm with NPT outlet
BB650-COPM Standard Grade-D breathing air panel with CO monitor - 650 cfm with NPT outlet

Carbon Monoxide & Oxygen Monitoring Panels
BB50-CO2PM Standard Grade-D breathing air panel with CO/O2 monitor - 50 cfm with 4 respirator couplings
BB100CO2PM Standard Grade-D breathing air panel with CO/O2 monitor - 100 cfm with 4/6 respirator couplings or NPT outlet
   
Auto-Air Panel Models
BB50COAAPM Auto-Air Panel Grade-D breathing air panel with CO monitor - 50 cfm with 4 respirator couplings
   
Intrinsically Safe Models Approved
BB15COPMIS   Grade-D breathing air panel with intrinsically safe CO monitor - 15 cfm with 1 respirator coupling
BB30COPMIS   Grade-D breathing air panel with intrinsically safe CO monitor - 30 cfm with 2 respirator coupling
BB50COPMIS   Grade-D breathing air panel with intrinsically safe CO monitor - 50 cfm with 4 respirator coupling
 
CALIBRATION KIT
BBK-20   Calibration Kit for CO monitor 17 liter  - 20ppm CO gas
BBK-10   Calibration Kit for CO monitor 17 liter - 10ppm for INTERNATIONAL calibration

Back to top ▲