View the Catalog Page and ordering Info
Our hazardous material vacuums are equipped with a certified HEPA filter, a double layer intermediate micro filter, and a totally enclosed 2-ply disposable paper filter bag. The HEPA filter is made of high strength microfiber glass paper separated by corrugated aluminum sheeting entrapped in a steel screen. All HEPA filters are rated with a minimum efficiency of 99.97% at 0.3 microns.
All Certified HEPA filters meet or exceed the following standards: UL-900; ansi-2-92
Optional: UL-586 HEPA filter available, contact Customer Service for details.
Model AV-5POLY 5 Gallon HEPA Vacuum,1.3 HP, with Tool Kit |
Model AV-5 5 Gallon HEPA Vacuum, 1.3 HP |
Model AV-15 15 Gallone HEPA Vacuum, 2.3 HP |
Electric HEPA Vacuum Details: 120 VAC, 60Hz, 2 stage by-pass motor, 94 - 115 cfm, 84" - 110" water lift, 30 foot power cord with plug. Also includes: HEPA filter, intermediate pre-filter, 2-ply disposable paper filter bag, and tool kit.
Tool kit includes: 5 foot curved steel wand (AV-100), 10 FOOT VACUUM HOSE WITH END CUFFS (AV-H10), CREVICE TOOL (AV-103), INLET SWIVEL CONNECTOR (AV-101), and hard floor brush (AV-6200).
NOTE: Electric motors are UL, CUL and CSA listed. Optional voltage and Hertz available. Consult Customer Service for details.
View the Catalog Page and Ordering Info
Pneumatic powered vacuums are ideal for working in wet environments or where long lengths of vacuum hose are required. Air motors require no maintenance and contain no moving parts. A built-in pressure relief valve restricts water lift to 160" to prevent tank collapse. An on/off flow valve and pressure gauge are provided
Specifications
|
AV-15P |
AV-5P |
AV-15P-CND |
Conductive Pneumatic HEPA Vacuums
|
AV-55P-CND |
View Catalog Page and Ordering Info
Fume-Air™ 210 - Dual Speed Fume Extractor
Designed for Light to Medium Welding Applications
|
|
Air Systems’ dual speed portable fume extractor, Model PFE-210, provides 105 or 210 cfm flow through a 2“ x 9’ hose and a 6” capture nozzle with magnetic base stand. Ideal for light to medium welding applications, such as spot or bench top welding, where large cabinet style fume extractors are not practical. The PFE-210 features a removable steel spark tray, and stainless steel filter spark screen.
Available with MERV 15 filter (PFE-210NAN) or MERV 17 HEPA filter (PFE-210HEP).
Key Details:
Dimensions: 35.5” L x 18.5” H x 16.5” W Weight: 48 lbs
Exceeds North American safety standards for weld fume capture-at-source
|
|
|
|
.Stainless Steel Screen |
MERV 15 Filter |
View Catalog Page and Ordering Info
FUME-AIR™ 750 Arm shipped completely assembled and ready to bolt on main extractor cabinet |
Source Capture to Meet OSHA Standards
Portable HEPA Filtered Fume-Air™ 750 |
Specifications
|
FILTER CHANGE INDICATOR |
LIFT UP FILTER DOOR FOR EASY ACCESS FILTER CHANGE |
Important Welding Fume Health Standard Change:
Effective May 30, 2006, OSHA lowered the PEL for Hexavalent Chromium and its compounds called Hex Chrome from 52 to 5 micrograms per cubic meter. This standard affects all general industry, shipyards, and construction industry activities with regard to welding on stainless steel and painted surfaces. The new standard necessitates source capture of these extremely harmful compounds with the use of HEPA filtered portable welding fume extractors. (FED REG 71:10099-10385)
|